The image to the right is what the card should look like at the end of our journey together. Forgive me for the image quality, that's the best my phone will do.

​

How can I print this card?

Each card will have a slightly different assembling process, but that is okay. For this card, you will need one small brad and a jar of rubber cement (or a stick of glue). These instructions are mostly boiled down versions of the instructions on the home page.

 

1. Print those pdfs at any printer (The ones attached below).

Note: You should be able to print the outside of the card and the inside of the card on two sides of the same sheet of paper. Print the first, and then turn the sheet over and feed it through one more time.

​

2. Cut out the design via the Cricut Printer with this link here. You should be able to find this card amongst the three listed. (Madeline is not me, but she owns the printer don't worry). You can use this video to help you with the cutting process. (there are also helpful prompts in the design space).

​

You'll have to download the Cricut Design Space and all that. Here is a helpful video on doing that. You will also need to create a free account with said design space.

​

3. If you have two pieces, fold them both hamburger style and skip to step 5.

4. If you have three pieces, glue the front and back of the card portion together, fold this new card hamburger style along with the cover. 

​

5. Lastly, take your finest piece of string around the spine of the card to hold the pieces together. I didn't have any fancy string, but the world is your oyster (Unless you have a shellfish allergy).

​

6. After your done, put that baby in an envelope with a stamp because it will probably get damaged otherwise.